Punching Tool

HOME > Hand Tool Manufacturer > Punching Tool

QualitySupplier In Taiwan of Punching Tool

Being a professional punching tool manufacturer with leading techology, Tai Cheng always does the best for considering and fulfilling that customers' needs and demands. A wide range of punching tools produced and provided by Tai Cheng is for meeting diverse requirements in the compatitive marketing of hand tools. Tai Cheng punching tool is including hydraulic punching tool, ratchet type to punch, angle-steel hydraulic punching tool, double-hole type of hydraulic punching machine, light steel hydraulic tools, female wire processing machines and so on.

Hydraulic Punch Tool

Hydraulic Punching Tool

    • When the complete of electricity distributed tray, switch case, if want to change the specification, it can be changed easily the size of dies and never destroy the surface after punching.
    • The size of dies can be ordered to make, quick delivery.
    • Pump can match CTE-25AS, CP-700, CFP-800-1
    • When order to make the rectangular and square type, it must measure the correct and required sizes.
Ratchet Type to Punch: CC-104RW

Ratchet Type of Punching Tool

    • Firstly use the 3/8" of hammer drill to punch, let R-1 match 1/2" of up and low razor dies and cover the ratchet type of mobile wrench to operate.
    • The thickness of iron plate is 3.2mm; stainless steel is below 2.0mm.
    • New item and labor-saving type. The iron-clip punched is two pieces.
    • Needn't use hydraulic pump and hydraulic cylinder, expense-saving and low cost.
Angle-steel hydraulic Punch Tool: CH-60

Angle-steel hydraulic Punching Tool

    • Separate type of liquid pressure drilling machine which is available to L, H plate steel copper plate and aluminum plate for punching.
    • There was designed plain seat on the bottom, very steady and smooth.
    • Single-hole type of return oil, the dies were made with High-carbon Tungsten alloy steel, not easy to be damaged.
Double-hole Type of Hydraulic Punching Machine

Double-hole Type of Hydraulic Punching Tool

    • Model: CH-80 (Available: angle-steel, circle, oval for drilling a hole.)
    • Max. hole diameter: 25mm / Max. Thickness: 16mm
    • Throat depth : 115mm / Tonston: 50
    • Dies equipment mm: 16,18,22,25x4
    • Available pump double-hole type: CTE-25AD,D-2SW-4
Light Steel Hydraulic Tools

Light Steel Hydraulic Punching Tool

    • Research and develop the handy, light steel type of punching tool to be easy to punch and reach quickness.
    • Separate type must be matched with hand pump CP-700 or power pump CTE-25AS; this is can add the length  of hose when operating on high
    • The materials are iron plate, stainless steel plate, angle steel and C type of steel 4mm; the max. hole diameter 13mm.
Female Wire Processing Machine: CWC-150

Female Wire Processing Machine of Punching Tool

    • Hydraulic, separate type to bend and cut the copper plate and aluminum plate.
    • Available to switch case, distributed electricity-tray; be automatic to control the distributed cable of engineering; use this item easily.
    • The opening of copper plate cut by CWC-200V is smooth, which is the excellent item.

Welcom to veiw punching tool details below or contact us for more information.