Pulling-Wheel Tools

Hydraulic type of pulling wheel tools

Separate type  output: 10-50 tons, pulling wheel: 50-1100m/m

• Hydraulic type of pulling wheel not only can save time, but also can reach the highest efficiency, which has extensive purposes in car maintenance mill and machinery mill; any bearing, pulley, motor, gear wheel can use it.
• Apply it to the maintenance mill, machinery factory of gear wheel, pulley, gearing or other wheels. At present the sugar mill, steel mill and large iron factory have bought and used it.

CPS-10

CPS-20

Characters:

1. Based on the wheel shape to change the length of the claw to match the work finished.
2. Based on the working requirement to charge the length of the claw to match the work finished.
3. This item has adjustable axis heart to make the work processed.
4. Have good pulling force of design, when the pressure increases, three claws can balance the fixation to process the pulling wheel operation.
5. This item has separate type to carry easily, doesn't be limited by working space, easy to operate.
6. To increase the working efficiency, labor saving, to match power pump and hand pump series.
7. This item uses very special steel material to be cast, not easy to damage.

Drawings:
A: Axis heart strike(pulling strike)
C: Pulling wheel area(claw distance)
D: Fastening adjust screw
E: Turning axis heart of axis
B: Fixed active arm of distance
F: Length of claw

Hydraulic separate type of pulling wheel

Type: CPS-10L
Output: 10, 15, 25, 50, 100 tons

It is the easiest tonnage, because separate type of design can manufacture and design from 10 ton, 15, 25, 50, 100 etc, and match the claw of strike for working operation, it can be matched with the liquid pressure of pump; hand type and powerful type to carry easily.

• The design of claw has 4 holes to be able to change based on the depth of pulling wheel.
• Enclosed 3 pieces of claw with 3 points to be balanced, labour saving and quick.
• The centre assists to make quick hydraulic strike and touch the centre point of axis bearing, to save pulling stroke and time.
• Match the pump; please use CP-700 type and power CTE-25AS.
• The claw material is high carbon steel, and passed the heat treatment HRC-55~58¢X.
• The outward shell of hydraulic cylinder is coated wonderfully.

CPS-10L

Figure for specifications

CPS-10L operating figure