HOME > Hand Tool Manufacturer > Lock Wire Tool > 3-Strunge Rolling Wheel CRS-3600

3-strunge rolling wheel CRS-3600

Work easily, operate easily and increase the working effency.

CRS-3600 Single type

CRS-3600-3
Ground cable releasing slipping wheel

Characters:

  1. The connecting part can be exchanged the angle by auto, and can do many times of connection.
  2. The rolling tube has the double layer design; the hole diameter can be adjust by your working requirement, wire pulling direction is not on the level, also can be used.
  3. Working on the ground is the most suitable to use, wire releasing on the surface of ground is the suitable to use.
  • Total length: 580mm
  • Total area: 160mm
  • The large part of rolling tube:150°m
  • The small part of rolling tube: 50 °m
  • The width of rolling tube: 128mm
  • Safe load: 5,880N(600kgf)
  • Wire frame of bearing article
  • Wire frame of tube board of bearing rack
  • Aluminum material of wheel